Dell PowerVault TL4000 Betriebsanleitung Seite 24

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 80
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 23
R
e
m
o
v
e
b
e
f
o
r
e
o
p
e
r
a
t
i
o
n
!
3. Attach the other end of the SCSI cable to the connector on the SCSI host bus adapter or to the
connector on the previous device on the SCSI bus.
NOTE: The host bus adapter should be LVDS. A SE SCSI host bus adapter will work, but will severely
degrade performance, and limit cable length. If there are any SE devices on the same SCSI bus, the
entire SCSI bus will negotiate down to SE speed and severely degrade performance. Never attach the
LTO3 tape drive to a SE SCSI bus.
4. Attach the terminator to the remaining SCSI connector on the back panel of the library, if the
library is the last or only device on the SCSI bus (see Figure 13). Otherwise, attach one end of
a SCSI cable to the remaining port and the other end to the next device on the SCSI bus.
Make sure that the last device on the SCSI bus in properly terminated.
Figure 14 Attaching the terminator to the LTO3 full height drive
R
e
m
o
v
e
b
e
f
o
r
e
o
p
e
r
a
t
i
o
n
!
5. Attach the power cable to the power connector on the back panel of the library (see Figure
14).
6. Plug the power cable into the nearest properly grounded power outlet.
Figure 15 Attaching the power cable
R
e
m
o
v
e
b
e
f
o
r
e
o
p
e
r
a
t
i
o
n
!
CAUTION: To disconnect all power from the library, remove the power cord from the outlet. The power
button only puts the power on stand-by.
Seitenansicht 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 79 80

Kommentare zu diesen Handbüchern

Keine Kommentare