
5. Using the Torx screwdriver, remove the screws on each side of your library. Shown in Figure
10 (step 1).
Figure 11 Installing the mounting brackets and guide pulleys
11
2
3
6. Install the library guide pulleys on each side of the library using the 2 Torx screws included in
the rack kit (see Figure 10 step 2).
7. Install the mounting brackets of the library using the 4 Torxs screws included in the rack kit.
Shown in Figure 10 (step 3).
8. With library guide pulleys and mounting brackets installed, slide the library onto the rails.
9. Secure the library to the rack (see Figure 12) using a 3# Phillips screwdriver placed through
the small holes in the mounting bracket to tighten the M5 screw on each side of the library.
Kommentare zu diesen Handbüchern