
Table 5 LED descriptions
Number LED Color Description
1 Ready
(Activity)
Green Illuminated when power is on. Blinking when there is tape or
library robotics activity.
2 Clean
(Drive)
Amber Illuminated when the tape drive has determined that a cleaning
cartridge should be used. Cleaning is only necessary when the
library directs you to do so. Additional cleaning is not necessary.
3 Attention
(Media)
Amber Illuminated if the library has detected a condition that requires
attention by the operator.
4 Error Amber Illuminated if an unrecoverable tape drive or library error
occurs. A corresponding error message displays on the LCD
screen (see for more information).
OCP display, consisting of 128 x 64 characters
The OCP screen displays actions and status information, menu items or error messages equivalent
to the operation mode.
READY/ACTIVITY, Green LED
The READY/ACTIVITY LED is lit any time the unit is powered on and able to function. It will blink
whenever there is library or drive activity.
CLEAN DRIVE, Amber LED
The CLEAN DRIVE LED will be lit when the drive is to be cleaned. The LED will be turned off after the
tape drive is cleaned successfully.
MEDIA ATTENTION, Amber LED
The MEDIA ATTENTION LED will be lit when there has been a failure that indicates that there is a
piece of media that is bad, marginal or invalid. It will be cleared when all invalid cartridges have
been exported from the tape library.
ERROR, Amber LED
The ERROR LED will be lit when there is an unrecoverable library or drive failure. A message is
displayed at the same time on the screen. It will be cleared when the error state is resolved.
ENTER, button [↵]
The ENTER button to go to a sub menu or execute an action.
Kommentare zu diesen Handbüchern