Dell TL2000 Bedienungsanleitung PDF herunterladen (Seite 57)

1. Verify that your rack kit includes the following contents (see Figure 4-6):

v Packaged in plastic material:

– 2 rails (not shown)

– 2 mounting brackets (1)

Packaged in the small bag with no label:

– 1 T10 Torx wrench (5)

– 2 U-shaped anchors (4)

– 4 small screws for securing the anchors and brackets (6)

– 2 large screws to secure the mounting brackets to the rack (7)

Packaged in the small bag with ″Round Hole″ on the label: 9 screws to be

used on racks with round holes. (2)

v Packaged in the small bag with ″Square Hole″ on the label: 9 screws to be

used on racks with square holes. (3)

Note:

Eight screws are needed for the installation. One additional screw is

provided for security.

2. Determine the location in your rack for your library to be installed and, using a

pencil, mark the location on each vertical rail in your rack.

Note: A 2U library requires 2U (3.5 in.= two EIA) of rack space. A 4U library

requires 4U (7 in. = four EIA) of rack space

a77ug208

Figure 4-6. Rack Kit Mounting hardware

Chapter 4. Installation and Configuration 4-7

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 263 264

Keine Kommentare

Dell TL2000 Bedienungsanleitung Seite 57