Dell TL2000 Bedienungsanleitung PDF herunterladen (Seite 110)

– Web Interface (IPv6 Only and Dual Stack): Monitor Library → Library

Identity

DHCP - (Dynamic Host Configuration Protocol) If this is enabled, your library

host will negotiate the connection with the library. If DHCP is disabled, the

following information is necessary to establish the remote access.

v IP Address - the IP address of the library

v Netmask - the Network Mask address of the library

v Gateway - the Gateway address of the library

v Ethernet - the current speed setting of the ethernet interface

Configure: Set Access PIN

Use this menu item to enable/disable, set or change the Access PIN (personal

identification number) which is used to restrict access to the Control, Configure,

and Service menus.

The Operator Control Panel (OCP) pin is turned off by default, but it is strongly

recommended to be enabled if your environment requires unit security. Enabling

the OCP pin feature prevents the unit settings from being tampered with. Users

will be allowed to review the library status and manipulate media without

entering the OCP pin.

If a unit administrator needs to make a configuration change in the unit, the OCP

will ask for the 4-digit code in order to allow access to make changes. Once all the

changes are completed the pin access will expire after 5 minutes of inactivity in the

OCP (there is no log-out function in the library for this feature). A library reboot is

recommended after making configuration changes to the library.

Configure: Restore Defaults

Use this menu item to restore the factory default settings.

When reducing the number of drives in your library, factory default settings must

be restored to remove the Attention LED on the front panel and the exclamation

mark on the Home screen indicating that a drive is missing.

Important: Restoring factory defaults will wipe out all the previous configuration

data. The user must restore factory defaults when library drive configurations are

Configure

Set Access PIN

a77ug057

Figure 5-16. Configure: Set Access PIN menu

Configure

Restore Default

a77ug045

Figure 5-17. Configure: Restore Defaults menu

5-24 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 263 264

Keine Kommentare

Dell TL2000 Bedienungsanleitung Seite 110