Dell TL2000 Bedienungsanleitung PDF herunterladen (Seite 31)

Altitude (operating) 2500 meters (8200 ft.) at 25°C ambient

Maximum acoustical noise sound power levels LwAd in bels 6.6/6.8

Humidity

Operating 15% to 80% RH non-condensing

Storage, without cartridges 10% to 90% RH non-condensing

Product Environment

The library is designed to operate in a general business environment.

The library meets the acoustical requirements for general business area category

2D. Category 2D states that the library should be installed a minimum of 4 m (13

ft.) from a permanent work station.

To allow for service access, install the library a minimum of 0.9 m (3 ft.) from all

obstacles.

The library is a precision computer peripheral. To ensure maximum longevity of

your library, locate the library away from dust, dirt, and airborne particulates:

v Keep the library away from high-traffic areas, especially if the floor is carpeted.

Carpeting harbors dust and people walking on the carpet can cause the carpet

fibers and the dust to become airborne.

v Keep the library out of printer/copier rooms because of toner and paper dust.

Additionally, do not store paper supplies next to the library.

v Keep the library away from moving air caused by doorways, open windows,

fans, and air conditioners.

Ensure that the machine covers are always kept closed to minimize any

contamination from airborne particles.

Supported Device Drivers

The latest levels of device drivers can be downloaded by visiting

http://support.dell.com.

Note: The TL2000 and TL4000 libraries utilize the generic SCSI drivers in RHEL 4

and 5. Depending on the ISV you are using, you will use either the sg or st

driver. Please refer to your ISV documentation for more information on

which driver to use.

Chapter 1. Product Description 1-13

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 263 264

Keine Kommentare

Dell TL2000 Bedienungsanleitung Seite 31