Dell TL2000 Bedienungsanleitung PDF herunterladen (Seite 208)

2. Insert the cartridge magazines removed from the defective library into the same

positions in the replacement library enclosure.

3. Insert the cartridge magazines removed from the replacement library enclosure

into the same positions in the defective library to return to Dell.

4. Wait for inventory of the magazines to complete.

a. If inventory is successful:

1) The replacement library enclosure will complete with the

Ready/Activity LED (1 in Figure 10-17 on page 10-17) ON.

2) Power OFF the replacement library enclosure.

3) Proceed to “Swapping Library Controller Cards” on page 10-15.

b. If inventory is not successful:

1) The Error LED (4 in Figure 10-17 on page 10-17) will turn ON.

2) Power OFF the enclosure.

3) Contact Technical Support for further instructions.

Swapping Power Supplies

1. Unplug the power cord from the power source then from the replacement

library enclosure.

2. Swap the Power Supply in the defective library with the Power Supply in the

replacement library enclosure.

a. Remove the power supply from the defective library and from the

replacement library enclosure. To remove a power supply from a library:

1) Loosen the three blue captive thumbscrews on the power supply.

2) Pull on two of the thumbscrews to pull the unit away from the rear

panel of the library.

a77ug186

Figure 10-22. Left magazine pulled out of a 4U library (facing front of library)

10-22 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 263 264

Keine Kommentare

Dell TL2000 Bedienungsanleitung Seite 208