Dell TL2000 Bedienungsanleitung PDF herunterladen (Seite 202)

2. Power ON the replacement library enclosure.

a. If power ON is successful:

1) The replacement library enclosure will power up with the

Ready/Activity LED (1 in Figure 10-17 on page 10-17)

2) After power is restored to the replacement library enclosure, the library

will automatically restore the VPD on the replacement library enclosure

from the Library Controller Card. If a “VPD Selection” message is

displayed in the Operator Control Panel, see the “Read Me before

Continuing” section earlier in this procedure to determine how to

respond to the message.

3) Power OFF the replacement library enclosure.

4) Proceed to “Installing Your Drive(s) in the Replacement Library

Enclosure” on page 10-17.

If power ON is not successful:

1) The Error LED (4 in Figure 10-17 on page 10-17) will turn ON. This

indicates that the Library Controller Card from the defective library is

not functioning properly.

2) Power OFF the replacement library enclosure.

3) Contact Technical Support for further instructions.

a66mi097

Figure 10-16. Removing a Library Controller Card from the library

10-16 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide

1 2 ... 197 198 199 200 201 202 203 204 205 206 207 ... 263 264

Keine Kommentare

Dell TL2000 Bedienungsanleitung Seite 202