Dell IDRAC6 Betriebsanweisung PDF herunterladen (Seite 320)

320 Monitoring and Alert Management

Testing the RAC SNMP Trap Alert Feature

The RAC SNMP trap alerting feature allows SNMP trap listener

configurations to receive traps for system events that occur on the

managed system.

The following example shows how a user can test the SNMP trap alert feature

of the RAC.

racadm testtrap -i 2

Before you test the RAC SNMP trap alerting feature, ensure that the SNMP

and trap settings are configured correctly. To configure these settings, see

testtrap and testemail subcommand descriptions in the RACADM Command

Line Reference Guide for iDRAC6 and CMC available on the Dell Support

website at dell.com/support/manuals.

Frequently Asked Question about SNMP

Authentication

Why is the following message displayed:

Remote Access: SNMP Authentication Failure

As part of discovery, IT Assistant attempts to verify the device’s get and set

community names. In IT Assistant, you have the get community name =

public and the set community name = private. By default, the community

name for the iDRAC6 agent is public. When IT Assistant sends out a set

request, the iDRAC6 agent generates the SNMP authentication error because

it will only accept requests from community = public.

NOTE: This is the SNMP agent community name.

You can change the iDRAC6 community name using RACADM.

To see the iDRAC6 community name, use the following command:

racadm getconfig -g cfgOobSnmp

To set the iDRAC6 community name, use the following command:

racadm config -g cfgOobSnmp -o

cfgOobSnmpAgentCommunity <community name>

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 371 372

Keine Kommentare

Dell IDRAC6 Betriebsanweisung Seite 320