Dell IDRAC6 Betriebsanweisung PDF herunterladen (Seite 301)

Using the iDRAC6 Configuration Utility 301

The following sections describe the iDRAC6 Configuration Utility menu items.

iDRAC6 LAN

Use <Left Arrow>, <Right Arrow>, and the spacebar to select between On

and Off.

The iDRAC6 LAN is enabled in the default configuration. The LAN must be

enabled to permit the use of iDRAC6 facilities, such as the Web-based

interface, Telnet/SSH, Virtual Console, and Virtual Media.

If you choose to disable the LAN the following warning is displayed:

iDRAC6 Out-of-Band interface will be disabled if the

LAN Channel is OFF.

Press any key to clear the message and continue.

The message informs you that in addition to facilities that you access by

connecting to the iDRAC6 HTTP, HTTPS, Telnet, or SSH ports directly,

out-of-band management network traffic, such as IPMI messages sent to the

iDRAC6 from a management station, are not received when the LAN is

disabled. The local RACADM interface remains available and can be used to

reconfigure the iDRAC6 LAN.

IPMI Over LAN

Press <Left Arrow>, <Right Arrow> and the spacebar to choose between

On and Off. When Off is selected, the iDRAC6 will not accept IPMI

messages arriving over the LAN interface.

If you choose Off, the following warning is displayed:

iDRAC6 Out-of-Band IPMI interface will be disabled if

IPMI Over LAN is OFF.

Press any key to clear the message and continue. See "iDRAC6 LAN" on

page 301 for an explanation of the message.

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 371 372

Keine Kommentare

Dell IDRAC6 Betriebsanweisung Seite 301