Dell PowerConnect W Clearpass 100 Software Betriebsanweisung PDF herunterladen (Seite 84)

8484 | Wireless Network Profiles

Dell PowerConnect W-Series Aruba Instant 6.2.1.0-3.3 | User Guide

2. Select any for the following options for Client IP assignment:

l Virtual Controller assigned—On selecting this option, the client obtains the IP address from the Virtual

Controller. The Virtual Controller creates a private subnet and VLAN on the OAW-IAP for the wireless clients.

The network address translation for all client traffic that goes out of this interface is carried out at the source.

This setup eliminates the need for complex VLAN and IP address management for a multi-site wireless

network. For more information on DHCP scopes and server configuration, see DHCP Configuration on page

213.

l Network assigned—Select this option to obtain the IP address from the network.

3. If the Network assigned is selected, specify any of the following options for the Client VLAN assignment.

l Default— On selecting this option, the client obtains the IP address in the same subnet as the OAW-IAPs. By

default, the client VLAN is assigned to the native VLAN on the wired network.

l Static— On selecting this option, you need to specify a single VLAN, a comma separated list of VLANS, or a

range of VLANs for all clients on this network. Select this option for configuring VLAN pooling.

l Dynamic— On selecting this option, you can assign the VLANs dynamically from a Dynamic Host

Configuration Protocol (DHCP) server. To create VLAN assignment rules:

a. Click New to assign the user to a VLAN. The New VLAN Assignment Rule window appears.

b. Enter the following information:

l Attribute— Select an attribute returned by the RADIUS server during authentication.

l Operator— Select an operator for matching the string.

l String— Enter the string to match.

l VLAN— Enter the VLAN to be assigned.

4. Click Next to configure security settings for the employee network. For more information, see Configuring

Security Settings for a WLAN SSID Profile on page 84.

In the CLI

To manually assign VLANs for WLAN SSID users:

(Instant Access Point)(config)# wlan ssid-profile <SSID-Name>

(Instant Access Point)(SSID Profile<name>)# vlan <vlan-ID>

(Instant Access Point)(SSID Profile<name>)# end

(Instant Access Point)(SSID Profile<name>)# commit apply

To enforce DHCP-based VLAN assignment:

(Instant Access Point)(config)# wlan ssid-profile <SSID-Name>

(Instant Access Point)(SSID Profile<name>)# enforce-dhcp

(Instant Access Point)(SSID Profile<name>)# end

(Instant Access Point)(SSID Profile<name>)# commit apply

To create a new VLAN assignment rule:

(Instant Access Point)(config)# wlan ssid-profile <SSID-Name>

(Instant Access Point)(SSID Profile <name>)# set-vlan <attribute>{equals|not-equals| starts-

with| ends-with| contains} <operator> <VLAN-ID>| value-of}

(Instant Access Point)(SSID Profile <name>)# end

(Instant Access Point)# commit apply

Configuring Security Settings for a WLAN SSID Profile

This section describes the following procedures:

l Configuring Security Settings for an Employee or Voice Network

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 295 296

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PowerConnect W Clearpass 100 Software Betriebsanweisung Seite 84

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Dell PowerConnect W Clearpass 100 Software