
Figure 48 Maintenance Window: Certificates Tab
3. To upload a certificate, click Upload New Certificate. The New Certificate window appears.
4. Select the Certificate type— CA certificate and Server certificate from the drop-down list. The CA certificate is
required to validate the client’s certificate and the server certificate verifies the server's identity to the client.
5. Select the certificate format from the Certificate format drop-down list.
6. If you have selected Server certificate type, enter a passphrase in Passphrase and reconfirm. The default
password is whatever.
7. Click Browse and select the appropriate certificate file, and click Upload Certificate. The Certificate
Successfully Installed message is displayed.
Loading Certificates using OmniVista 3600
You can manage certificates using the OmniVista 3600. The AMP directly provisions the certificates and performs
basic certificate verification (such as certificate type, format, version, serial number and so on), before accepting the
certificate and uploading to anOAW-IAP network. The AMP packages the text of the certificate into an HTTPS
message and sends it to the Virtual Controller. After the VC receives this message, it draws the certificate content
from the message, converts it to the right format and saves it on the RADIUS server.
To load a certificate in OmniVista 3600:
1. Navigate to Device Setup > Certificate and then click Add to add a new certificate. The Certificate window
appears.
2. Enter the certificate Name, and click Choose File to browse and upload the certificate.
AOS-W Instant 6.2.1.0-3.3| User Guide Authentication | 151
Kommentare zu diesen Handbüchern