54 Secured iSCSI Using Challenge-Handshake Authentication Protocol
Target Settings
Configure the Target settings of CHAP as described in "iSCSI Target settings"
on page 52 and perform the following steps:
1
In the
<Target Name> Properties
window, select the
Authentication
tab.
2
Select the check box for
Enable reverse CHAP authentication
. In the
User name
field, enter the IQN of the Initiator.
3
In the
Reverse secret
field enter the
Secret
value that you set in the
Initiator.
NOTE: Ensure that the Reverse secret is not the same as the CHAP secret.
The Reverse secret must contain 12 to 16 characters.
Initiator Settings Continued
1
Configure the Initiator settings for CHAP as described in "iSCSI Initiator
Settings" on page 53.
2
In the
Advanced Settings
window
→
select
CHAP logon information
→
enter the
User name
and
Target secret
. Select the check box for
Perform
mutual authentication
and click
OK.
You can log in only if you have credentials that you entered for the Target
and Initiator.
Kommentare zu diesen Handbüchern