Dell PowerVault NX1950 Bedienungsanleitung PDF herunterladen (Seite 35)

Detailed End-to-End iSCSI Setup 35

The

Review Settings and Create Storage

screen appears. Review the

storage settings and click

Create

The Storage provisioning occurs and the

Confirmation

screen appears

indicating a successful provisioning operation.

The LUN is now created and ready for use. The step 5 creates iSCSI

Targets and associates the iSCSI Targets with the newly-created LUN.

The PowerVault NX1950 storage solution uses Windows Unified Data

Storage Server 2003 with Microsoft Virtual Disk Service (VDS) internally.

You can also view the LUN in the

PowerVault NX1950 Management

Console

→

Storage Manager for SANs

section.

Configuring NICs for iSCSI traffic in the PowerVault NX1950 storage

solution in standalone mode— To create iSCSI Targets you must configure

dedicated iSCSI NICs for iSCSI traffic and then create iSCSI Targets.

NOTE: Create iSCSI Targets only after configuring the Discovery tab in the

iSCSI Initiator

To configure dedicated iSCSI NICs:

Go to

PowerVault NX1950 Management Console

→

iSCSI Target

section

Right-click the iSCSI Software Target and select

Properties

In the

Microsoft iSCSI Software Target Properties

window, go to the

Network

tab. All the NICs on the PowerVault NX1950 storage solution

are listed.

Click

Edit

and uncheck public and private network IP address from

the list. Unchecking public and private network IP addresses from the

list ensures that only the dedicated iSCSI NICs are configured for

iSCSI traffic.

If you have an iSNS server configured in your network, go to

iSNS

tab

and add the iSNS server IP address. Click

The following steps describe the procedure to create two iSCSI Targets as

shown in the example, Figure 3-4. Each Target is made available to a

different application on the host server. The Target in the Microsoft-based

iSCSI Target solutions only defines the path that the iSCSI storage traffic

uses from the iSCSI Initiator. The storage used by the Target is defined in

a later step when the Virtual Disks are created.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 69 70

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PowerVault NX1950 Bedienungsanleitung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Dell PowerVault NX1950