Dell QLA2200 Installationsanleitung PDF herunterladen (Seite 23)

Setting the Topology for QLogic HBAs

2-11

Installing and Configuring the HBA and Driver

Setting the Topology for QLogic HBAs

The EMC default setting for the topology currently is set to 2 (Loop

preferred; otherwise, point to point). Follow these steps to set the

NVRAM variables for the topology:

1. Boot the host. When the QLogic banner appears, press

CTRL-Q to

enter Fast!Util.

2. Select Configuration Settings from the Fast!Util Options menu.

3. Select Adapter Settings from the Configuration Settings menu.

4. Select Connection Options and press

ENTER.

5. Select the appropriate topology and press

ENTER:

•FC-AL — 0 (loop only)

•FC-SW — 1 (point to point only)

6. Press

ESC to return to the Fast!Util Options menu.

7. When prompted to save the changes made to the current adapter,

select Save Changes.

8. If you have more adapters to configure, choose Select Host

Adapter and repeat steps 2 through 7 for each adapter.

9. Press

ESC to exit Fast!Util.

10. Reboot the host.

QLogic_Linux.book Page 11 Monday, November 1, 2004 2:15 PM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 81 82

Keine Kommentare

Dell QLA2200 Installationsanleitung Seite 23