Dell QLA2200 Installationsanleitung PDF herunterladen (Seite 19)

Configuring the BIOS Settings

2-7

Installing and Configuring the HBA and Driver

EMC HBA Settings

EMC requires configuring the QLogic BIOS settings with the

EMC-approved NVRAM settings file. This file contains all of the

BIOS settings for the QLogic adapters that have been tested and

approved for connection to EMC storage arrays.

Refer to the EMC Support Matrix for required NVRAM versions for qualified

HBAs.

Pre-Configured

Settings

The following parameters have been pre-configured in the EMC

NVRAM. They are also configurable in the Host Adapter Settings,

Advanced Settings, and Extended Firmware Settings menus.

These settings apply to PowerPath and non-HA connections.

Table 2-1 QLA23xx BIOS Settings

Host Adapter Settings QLogic Default EMC Default

Host Adapter BIOS Disabled Disabled

Frame Size 2048 2048

Loop Reset Delay 5 5

Adapter Hard Loop ID Disabled Disabled

Hard Loop IP 0 0

Spinup Delay Disabled Disabled

Connection Options 2 2

Fibre Channel Tape Support Enabled Disabled

Data Rate 2 (Auto Select) 2 (Auto Select)

Advanced Adapter Settings QLogic Default EMC Default

Execution Throttle 16 256

LUNs per Target 8 256

Enable LIP Reset No No

Enable LIP Full Login Yes Yes

Enable Target Reset Yes Yes

QLogic_Linux.book Page 7 Monday, November 1, 2004 2:15 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 81 82

Keine Kommentare

Dell QLA2200 Installationsanleitung Seite 19