Dell QLA2200 Installationsanleitung PDF herunterladen (Seite 14)

2-2

EMC Fibre Channel with QLogic HBAs in the Linux x86 Environment

Installing and Configuring the HBA and Driver

Installing the HBA

Before the QLogic HBA is installed, the host must be configured with

Linux. Install the Linux kernel (including sources) from the distribu-

tion installation CD, following the procedure provided in the distri-

bution installation guide. Partition the boot drive and select the

packages and services necessary for the host.

To install the QLogic HBA, follow the instructions included with your

adapter. The adapter installs into a single slot.

Special Instructions for CLARiiON CX200 Direct-Connect Dual-Host Oracle

RAC

and Red Hat Enterprise Linux 2.1 Cluster Manager Clustering Configurations

For CLARiiON

CX200 direct-connect dual-host Oracle9i RAC or

Red Hat Enterprise Linux 2.1 Cluster Manager cluster configurations

with QLA234x HBAs, you must change the default HBA optic jumper

position:

CAUTION

Modifying the jumper setting without using the recommended

firmware/drivers can cause the HBA to lose connectivity.

1. Remove the HBA from the server as instructed by your server

guide.

2. Locate jumper(s) J3 (QLA2340) or J3 and J4 (QLA2342), shown in

the following figure.

QLogic_Linux.book Page 2 Monday, November 1, 2004 2:15 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Keine Kommentare

Dell QLA2200 Installationsanleitung Seite 14