Dell QLA2200 Installationsanleitung PDF herunterladen (Seite 17)

Installing the HBA

2-5

Installing and Configuring the HBA and Driver

HBAs connected to the same SP should all have unique hard loop IDs.

For example, select 0 for all HBAs on one node, and select 1 for all HBAs

on the other node.

7. Enter a value for the loop ID and press ENTER.

8. Press

ESC to return to the Configuration Settings menu.

9. Press

ESC to return to the Fast!UTIL Options menu.

10. When prompted to save changes made to the current adapter,

select Save Changes and press

ENTER.

11. If there are more adapters to configure, choose Select Host

Adapter, and repeat steps 3 through 11 for each adapter.

12. Press

ESC to exit Fast!UTIL.

13. Reboot the host.

14. Repeat this procedure on all nodes in the cluster connected to the

CX200.

CAUTION

Future use of the firmware NVRAM file to apply settings will

overwrite and possibly invalidate the changes made above. If you

will later update using a firmware NVRAM file, be sure it is listed

and supports this CX200 direct-connect cluster configuration.

To restore EMC default HBA settings, either reload the approved EMC

NVRAM file, or return to step 5 and ensure that Adapter Hard Loop ID is set

to Disabled.

QLogic_Linux.book Page 5 Monday, November 1, 2004 2:15 PM

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Keine Kommentare

Dell QLA2200 Installationsanleitung Seite 17