Dell DX6000 Bedienungsanleitung PDF herunterladen (Seite 138)

138 Installing System Components

Remove the cooling shroud. See "Removing the Cooling Shroud" on

page 103.

Locate the memory module sockets. See Figure 6-2.

5 Press down and out on the ejectors on each end of the socket until the

memory module pops out of the socket. S

ee Figure 3-25.

CAUTION: Handle each memory module only by the card edges, ensuring not to

touch the components on the module.

Reinstall the cooling shroud.

Close the system. See "Closing the System" on page 83.

Reconnect your system and peripherals to their electrical outlets, and turn

on the system.

Processors

Removing a Processor

CAUTION: Many repairs may only be done by a certified service technician.

You should only perform troubleshooting and simple repairs as authorized in

your product documentation, or as directed by the online or telephone service

and support team. Damage due to servicing that is not authorized by Dell is not

covered by your warranty. Read and follow the safety instructions that came

with the product.

Prior to upgrading your system,

download the latest system BIOS version

from support.dell.com and follow the instructions included in the

compressed download file to install the update on your system

Turn off the system, including any attached peripherals, and disconnect

the system from the electrical outlet. When disconnected from AC power,

press and hold the power button for 3 seconds to fully drain the system of

stored power prior to removing the cover.

NOTE: It is recommended that you always use a static mat and static strap

while working on components in the interior of the system.

Open the system. See "Opening the System" on page 83.

Remove the cooling shroud. See "Removing the Cooling Shroud" on

page 103.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 197 198

Keine Kommentare

Dell DX6000 Bedienungsanleitung Seite 138