Dell Dimension L___cx Bedienungsanleitung PDF herunterladen (Seite 135)

support.dell.com Diagnostic Codes, Beep Codes, and System Messages C-33

Recovery mode from

BIOS failure.

Set the configuration jumper to

Maintenance mode (see (see

Table 2-2), and restart the sys-

tem. Exit and save changes in

the system setup program. Turn

off the computer, reset the con-

figuration jumper to Normal

mode, and then restart the

system.

Remove all expansion cards and

restart the system to determine

if a resource conflict exists. If a

conflict exists, resolve the con-

flict as described in “Resolving

Software and Hardware Incom-ware and Hardware Incom-

patibilities” in Chapter 5. If the

problem persists, refer to

Chapter 7, “Getting Help,” for

instructions on obtaining techni-

cal assistance.

Microprocessor has

failed a BIOS test.OS test.

Refer to Chapter 7, "Getting

Help," for instructions on obtain-

ing technical assistance.

Memory failed to be d to be

sized or enabled.

Reseat the DIMMs as described

in “Reseating DIMMs” in

Chapter 6. If the problem per-

sists, refer to Chapter 7, “Getting

Help,” for instructions on

obtaining technical assistance.

Table C-1. Diagnostic Codes (continued)

Diagnostic Code Definition Corrective Action

NOTE: The Glossary in the system Help defines abbreviations and acronyms.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 161 162

Keine Kommentare

Dell Dimension L___cx Bedienungsanleitung Seite 135