Dell PowerVault DP500 Bedienungsanleitung PDF herunterladen (Seite 46)



6. Align the memory module's edge connector with the alignment key on the memory module socket, and insert the memory module in the socket.



7. Press down on the memory module with your thumbs while pulling up on the ejectors with your index fingers to lock the memory module into the socket.

When the memory module is properly seated in the socket, the ejectors on the memory module socket align with the ejectors on the other sockets that

have memory modules installed.



8. Repeat step 3 through step 7 of this procedure to install the remaining memory modules.



9. Replace the memory cooling shroud. See Installing the Cooling Shroud.



10. Close the system. See Opening the System.



11. (Optional) Enter the System Setup program, and check the System Memory setting on the main System Setup screen. See Entering the System Setup

Program.

The system should have already changed the value to reflect the newly installed memory.



12. If the value is incorrect, one or more of the memory modules may not be installed properly. Repeat step 2 through step 11 of this procedure, checking to

ensure that the memory modules are firmly seated in their sockets.



13. Run the system memory test in the system diagnostics. See Running the System Diagnostics.



Removing Memory Modules



1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.



2. Open the system. See Opening the System.



3. Remove the memory cooling shroud. See Removing the Cooling Shroud.



4. Locate the memory module sockets on the system board. See Figure6-2.



memory module

memory module socket ejectors (2)

socket

alignment key

NOTE: The memory module socket has an alignment key that allows you to install the memory module in the socket in only one way.

NOTICE: Never operate your system with the memory cooling shroud removed. Overheating of the system can develop quickly resulting in a shutdown

of the system and the loss of data.

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See

your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against

electrostatic discharge.

NOTICE: Never remove the memory cooling shroud without first powering down the system. Overheating of the system can develop quickly resulting in

a shutdown of the system and the loss of data.

CAUTION: The DIMMs are hot to the touch for some time after the system has been powered down. Allow the DIMMs to cool before handling

them. Handle the DIMMs by the card edges, and avoid touching the DIMM components.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PowerVault DP500 Bedienungsanleitung Seite 46

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Dell PowerVault DP500