Dell 2355dn Betriebsanweisung Seite 179

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 320
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 178
178
Configuring TCP/IP
Static Addressing: TCP/IP address is assigned manually by the system administrator.
Dynamic Addressing BOOTP/DHCP (default): TCP/IP address is assigned automatically
by a DHCP or BOOTP server on your network.
NOTE: Only the system administrator can set the IP address forTCP/IP (IPv6).
Setting TCP/IP
To enter the TCP/IP setting from your printer’s operator panel, take the following steps:
1
Press
Setup
Machine Setup
from the home screen.
2
Press the
Next
( ) button.
3
Press the up/down arrows to select
Network Setup
.
4
Press the up/down arrows until you see the desired protocol
If you selected
TCP/IP (IPv4)
.
a
Press
IPv4 Activate
.
b
Press the left/right arrows to change the setting to
On
(enable) or
Off
(disable).
If you selected
TCP/IP (IPv6)
.
a
Press
IPv6 Activate
.
b
Press the left/right arrows to change the setting to
On
(enable) or
Off
(disable).
5
Press the home icon ( ) to return to the Standby mode.
Static Addressing
To enter the TCP/IP address from your printers operator panel, take the following steps:
1
Press
Setup
Machine Setup
from the home screen.
2
Press the
Next
( ) button.
3
Press the up/down arrows to select
Network Setup
.
4
Press the up/down arrows to select
TCP/IP (IPv4)
.
5
Press the up/down arrows to select
Set IP Address
.
6
Select
Configuration
and press the left/right arrows to select
Manual
.
7
Select the
IP Address
menu.
An IP address consists of 4 bytes.
8
Press 1st byte area and enter the numbers using the keypad.
Enter the rest of the bytes in the same way.
9
Enter other parameters, such as the
Subnet Mask
or
Gateway
.
10
After entering all parameters, press the home icon ( ) to return to the Standby mode.
Seitenansicht 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 319 320

Kommentare zu diesen Handbüchern

Keine Kommentare