Dell Force10 S60-44T Installationshandbuch PDF herunterladen (Seite 30)

Access the Console Ports | 30

To access the USB-B console port, follow these steps:

Step Task

1 Power on the PC (Dell Force 10 recommends using an XP operating system).

2 Connect the USB-A end of cable (included) into an available USB port on the PC.

3 Connect the USB-B end of cable into the USB-B console port on the S60 system.

4 Power on the S60 system.

5 Install the necessary USB device drivers (an internet connection is required). For assistance, contact Dell

Networking Technical Support.

6 Open your terminal software emulation program to access the S60 system.

7 Set the terminal connection settings as follows:

• 9600 baud rate

• No parity

• 8 data bits

•1 stop bit

• No flow control

8 The CLI command prompt appears when you are connected to the S60 system.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 44 45

Keine Kommentare

Dell Force10 S60-44T Installationshandbuch Seite 30