Dell AX4-5 Spezifikationen PDF herunterladen (Seite 44)

The following steps outline the process for initializing an SRM environment using Navisphere Manager

and/or Navisphere SecureCLI. The commands must be issued from a management host that is network

connected to the production CLARiiON storage array. Note that all of these commands can be performed

in the Navisphere Manager GUI or in CLI.

Using Navisphere Manager to configure MirrorView

To configure sync or async mirrors, open the wizard and follow the instructions in the wizard.

Figure 27. MirrorView Wizard

Configuring sync mirrors via NaviSecCLI

1. If not already established, create a path or paths for remote mirroring between the primary and

secondary CLARiiON with this command:

naviseccli –h SP ipaddress mirror –sync –enablepath SPhostname

[-connection type fibre|iscsi]

2. Once you have created mirror paths, create a remote mirror of the LUN(s) that you wish to

protect with SRM. The LUN(s) on which the mirror is created becomes the primary image.

naviseccli –h SP ipaddress mirror –sync –create –lun <LUN_Number>

3. The secondary image on the remote CLARiiON can then be added to the primary image.

After the secondary image is added, the initial synchronization between the primary and the

secondary images is started. The following command assumes that the LUN(s) are already

created on the remote CLARiiON storage system.

EMC CLARiiON Integration with

VMware ESX Server

Applied Technology 44

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 57 58

Keine Kommentare

Dell AX4-5 Spezifikationen Seite 44