Dell PS4100 Installationsanleitung PDF herunterladen (Seite 26)

PS4100 Installation Guide Software Configuration

Table 6 Array Configuration Information

Table 7 Group Configuration Information

Prompt Description

Member name Unique name for the array in the group (63 or fewer letters, numbers, or

hyphens). First character must be a letter or number.

Network interface Name of a network interface on the array (eth0 or eth1) that is connected to a

functioning port on a network switch.

IP address Network address for the array network interface.

Note: Each member must have at least one network interface on the same sub-

net as the group IP address.

Netmask Address that combines with the IP address to identify the subnet on which the

array network interface resides (default is 255.255.255.0).

Default gateway

(optional)

Network address for the device used to connect subnets and forward network

traffic beyond the local network. A default gateway is needed only if you want

the array network interface to communicate outside the local network (for

example, to allow access to volumes from computers outside the local network).

Note: The default gateway must be on the same subnet as the array network

interface.

RAID policy RAID level and spare drive configuration for the array. The actual number of

RAID sets and spare drives depends on the number of drives in the array.

• RAID 10 – Striping on top of multiple RAID 1 (mirrored) sets.

• RAID 50 – Striping on top of multiple RAID 5 (distributed-parity) sets.

Each RAID 5 set uses one drive's worth of space for parity.

• RAID 5 – Distributed-parity sets.

• RAID 6 – Multiple dual distributed-parity sets.

• RAID 6 Accelerated – Only available on XS and XVS array models.

Prompt Description

Group name Unique name that identifies the group (54 or fewer letters, numbers, or hyphens).

The first character must be a letter or number.

Group IP address Network address for the group. The group IP address is used for group

administration and computer access to data stored in the group.

Password for adding

members to a group

Password required when adding members to a group. The password must have 3

to 16 letters or numbers and is case-sensitive.

Password for the

grpadmin account

Password that will override the factory-set group administration password

(grpadmin) for the grpadmin account. The password must have 3 to 16 letters or

numbers and is case-sensitive.

Required only when creating a new group.

Microsoft service user

name and password

(optional)

CHAP user name and password used to enable Microsoft service (VSS or VDS)

access to the group. The user name must have 3 to 63 alphanumeric characters.

The password must have 12 to 16 alphanumeric characters, and is case-sensitive.

Microsoft services running on a computer must be allowed access to the group

in order to create VSS snapshots in the group or use VDS.

Applicable only when creating a group with the Remote Setup Wizard.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PS4100 Installationsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Server Dell PS4100