Dell PS4100 Installationsanleitung PDF herunterladen (Seite 15)

PS4100 Installation Guide Rack Mounting the Array

Figure 3 2.5-Inch Drive Array - Front View (without Bezel)

Caution: Be careful when lifting the chassis.

1. With assistance, lift the chassis and slide it onto the mounting rails. Keep the chassis level.

2. Make sure the chassis captive fasteners on the front of the array line up with the threaded holes on the

front of the mounting rails, and manually secure the captive fasteners to the rails. Do not use an

automatic driver to tighten the thumbscrews.

Installing the Bezel

The steps for installing the bezel are the same for all the array models.

1. Hook the right end of the bezel onto the right side of the chassis.

2. Swing the left end of the bezel towards the left side of the chassis.

3. Press the bezel into place until the release latch closes.

4. Using the key provided, lock the bezel and store the key in a safe place.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 48 49

Keine Kommentare

Dell PS4100 Installationsanleitung Seite 15