Dell Managed PDU LED Bedienungsanleitung PDF herunterladen (Seite 139)

USER’S GUIDE

Managed Rack PDU

134

Configuring the RADIUS Server

Summary of the configuration procedure

You must configure your RADIUS server to work with the Rack PDU.

1. Add the IP address of the Rack PDU to the RADIUS server client list (file).

2. Users must be configured with Service-Type attributes unless Vendor Specific

Attributes (VSAs) are defined. If no Service-Type attributes are configured,

users will have read-only access (on the Web interface only).

3. VSAs can be used instead of the Service-Type attributes provided by the

RADIUS server. VSAs require a dictionary entry and a RADIUS users file. In

the dictionary file, define the names for the ATTRIBUTE and VALUE keywords,

but not for the numeric values. If you change numeric values, RADIUS

authentication and authorization will fail. VSAs take precedence over standard

RADIUS attributes.

For examples of the RADIUS users file with Vendor Specific Attributes (VSAs)

and an example of an entry in the dictionary file on the RADIUS server, see

Appendix B: Security Handbook.

See your RADIUS server documentation for information about the

RADIUS users file, and see Appendix B: Security Handbook for an

example.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 243 244

Keine Kommentare

Dell Managed PDU LED Bedienungsanleitung Seite 139