
Chapter 7: bigpipe Command Reference
7-18
interface
Displays names of installed network interface cards and allows you to set
properties for each network interface card.
Setting the media type
The media type may be set to the specific media type for the interface card
or it may be set to auto for auto detection. If the media type is set is set to
auto and the card does not support auto detection, the default type for that
interface will be used, for example 1000BaseTX.
Setting the duplex mode
Duplex mode may be set to full or half duplex. If the media type does not
allow duplex mode to be set, this will be indicated by an onscreen message.
If media type is set to auto, or if setting duplex mode is not supported, the
duplex setting will not be saved to the bigip.conf file.
b interface <if_name> media <media_type> | show
b interface <if_name> duplex full | half | auto | show
b interface [<if_name>] show [verbose]
b interface [<if_name>] stats reset
Kommentare zu diesen Handbüchern