Dell 3-DNS Spezifikationen PDF herunterladen (Seite 280)

Chapter 7: bigpipe Command Reference

7-12

To disarm fail-safe on the gateway, enter the following command:

b global gateway failsafe disarm

To see the current fail-safe status for the gateway, enter the following

command:

b global gateway failsafe show

For more information about configuring gateway fail-safe, see Health

monitors, on page 4-137.

ip forwarding

Enables IP forwarding for the BIG-IP. IP forwarding exposes all of the node

IP addresses to the external network, making them routable on that network.

The default setting is disabled.

mirror

Enables mirroring functions globally for the BIG-IP. The mirror feature

duplicates the active unit’s real-time connection or persistence information

state on the standby unit for smooth transition to the inactive unit at

fail-over. The default setting is enabled.

memory_reboot_percent

The value you type, 80 or higher, is the percentage of memory that is in use

before the BIG-IP automatically reboots. The default value for this variable

is 95. To disable this feature, set the value to 0.

open_3dns_ports

This variable is required only when running one or more separate 3-DNS

Controllers in the network. It does not apply to running the 3-DNS software

module on the BIG-IP itself. The variable is disabled on the BIG-IP when

the 3-DNS Controller is not present in the network configuration. (See the

3-DNS Administrator Guide for more information.)

open_corba_ports

This variable enables and disables the CORBA ports, which allow

administrative CORBA connections. The default setting is disabled.

open_snmp_ports

This variable enables and disables the SNMP ports, which allow

administrative SNMP connections. The default setting is disabled.

open_telnet_port

This variable enables or disables ports for Telnet access, and the default

setting is disable.

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 425 426

Keine Kommentare

Dell 3-DNS Spezifikationen Seite 280