Dell PowerVault NX3100 Bedienungsanleitung PDF herunterladen (Seite 19)

Setup Steps for Initiator-Target Connection 19

Setting Up the Target (PowerVault Storage System)

From the PowerVault storage system, go to

Start

→

Server Manager

→

Storage

→

Microsoft iSCSI Software Target

The

PowerVault Server Manager Management Console

appears.

Select

Microsoft iSCSI Software Target

which is located in the storage

snap-in and right-click on

Properties

In the

Properties

window, select the

iSNS

tab and add the iSNS server

information (DNS Name or IP address).

NOTE: It is recommended that only NICs for iSCSI network are checked.

To create a Target, follow the instructions in "Configuring iSCSI

Connection With the PowerVault NAS Storage System" on page 14.

NOTE: During step 7 of Configuring the Target, use the Browse option to

ensure that the iSCSI Initiator Identifier screen displays all Initiators that are

registered with the iSNS server.

To create a virtual disk, follow the instructions in "Creating a Virtual Disk"

on page 16.

Log on - Configuring the Initiator-Target Connection From Initiator (Host)

For information about configuring the Initiator-Target connection, see "Log on -

Configuring the Initiator-Target Connection From Initiator (Host)" on page 17.

Log on from

Initiator

Initiator setup

Target setup

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Keine Kommentare

Dell PowerVault NX3100 Bedienungsanleitung Seite 19