
14 Setup Steps for Initiator-Target Connection
The following steps guide you through setting up an iSCSI Target and
establishing connection from an Initiator.
Configuring the Initiator (Host)
Configure the Microsoft iSCSI Initiator with the IP address of the Target
server's information. To configure the Initiator:
1
Go to the system that has Microsoft iSCSI Initiator installed.
2
Click
Start
→
Programs
→
Microsoft iSCSI Initiator
→
iSCSI Initiator
Properties
→
Discovery
tab.
3
Select
Add portal
.
4
Add the IP address of one of the NICs on the PowerVault storage system
that is configured for iSCSI traffic (see Figure 1-1).
5
Click
OK
.
Configuring iSCSI Connection With the PowerVault NAS Storage System
Creating the Target
1
From the PowerVault NAS appliance, select
Start
→
Server Manager
→
Storage
→
MS Software Target
.
2
Select
Microsoft iSCSI Software Target
icon.
The following options are displayed—
iSCSI Targets
,
Devices
, and
Snapshots
.
3
Select
iSCSI Targets
and either right-click or select the
More Actions
option in the
Actions
tab.
4
Select the
Create iSCSI Target
option.
5
The
Welcome to the Create iSCSI Target
wizard screen is displayed.
Select
Next
.
The wizard guides you through the process of Target creation.
Initiator setup Target setup
Log on from
Initiator
Log on from
Initiator
Target setup
Initiator setup
Kommentare zu diesen Handbüchern