Dell PowerVault DP100 Bedienungsanleitung Seite 48

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 88
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 47
4. Squeeze the two release tabs on the top of the fan assembly and lift the fan assembly away from the system. See Figure3-15.
Installing the Front System Fan
1. Insert the fan power cable through the cable routing hole in the expansion- card guide bracket. See Figure3-15.
2. Align the fan assembly with the slots in the chassis and lower the assembly into the chassis. See Figure3-15.
3. Pull the fan cable through the routing hole in the expansion-card guide bracket. See Figure3-15.
4. Connect the fan cable connector to the FRONT_FAN connector on the system board.
5. Close the system. See Connecting Drives.
6. Stand the system upright.
7. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Removing the Back System Fan
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2. Open the system. See Opening the System.
3. Remove the cooling shroud. See Removing the Cooling Shroud.
4. Disconnect the fan cable from the BACK_FAN connector on the system board. To identify system board connectors, see System Board Connectors.
5. Pull the release tab on the fan assembly away from the back panel and slide the fan assembly about 0.63 cm (0.25 inch) toward the expansion-card
slots. See Figure3-16.
1
expansion-card guide bracket
2
cable routing hole
3
fan power cable
4
release tabs (2)
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system.
Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system.
Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the
computer, and protecting against electrostatic discharge.
Seitenansicht 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare