Dell PowerEdge 860 Bedienungsanleitung PDF herunterladen (Seite 26)

24 Rack Installation Guide

Using the two nuts that you removed in step 2, tighten the nuts finger tight to secure

the adjustable mounting bracket (see Figure 1-14).

Repeat step 2 through step 4 to configure the other mounting rail.

Figure 1-14. Configuring the Adjustable Mounting Bracket for Flush-Mount Installation

Holding the left mounting rail at the location you marked, position the flush-mount

mounting flange against the front of the vertical two-post rack and secure it to the two-post

rail with two 12-24 x 0.5-inch pan-head Phillips screws (see Figure 1-15).

Slide the adjustable-mounting bracket so that it is against the back of vertical two-post rack

and secure it to the two-post rail with two 12-24 x 0.5-inch pan-head Phillips screws

(see Figure 1-15).

Repeat step 6 and step 7 to install the right mounting rail in the rack.

Using a 3/8-inch wrench or nut driver, tighten the nuts on the adjustable mounting brackets

on both mounting rails.

nuts (2 per bracket)

flush-mount

mounting flange

7.62-cm (3-inch) wide, flush-mount, threaded studs

adjustable mounting bracket

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 141 142

Keine Kommentare

Dell PowerEdge 860 Bedienungsanleitung Seite 26