Back to Contents Page
Internal Card With Bluetooth® Wireless Technology
DellPrecision™M20ServiceManual
Removing the Internal Card With Bluetooth®Wireless Technology
Installing the Internal Card With Bluetooth®Wireless Technology
Removing the Internal Card With Bluetooth®Wireless Technology
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the battery.
3. Press down and pull on the tab to open the card door.
4. Disconnect the card cable connector from the card, and remove the door with the card from the computer.
5. Holding the card by the card connector, press down the lever, and lift the card off the plastic knob.
6. Slide the card out of the plastic brackets.
Installing the Internal Card With Bluetooth®Wireless Technology
1. Slide the card into the plastic brackets on the door, and press the card onto the plastic knob.
2. Connect the card to the card cable connector, slide the door with the card into the card compartment, and gently press the door into position.
3. Replace the battery.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
Kommentare zu diesen Handbüchern