Dell PowerEdge 800 Wartungshandbuch PDF herunterladen (Seite 51)



6. Compress the two release tabs on the top of the fan assembly and lift the fan assembly away from the system. See Figure6-3.

Figure 6-3. Removing and Replacing the Front System Fan



Installing the Front System Fan



1. Insert the fan power cable through the routing hole in the expansion-card guide bracket. See Figure6-2.



2. Align the fan assembly with the slots in the chassis and lower the assembly into the chassis. See Figure6-3.



3. Pull the fan cable through the routing hole in the expansion-card guide bracket. See Figure6-2.



4. Connect the fan cable connector to the FRONT_FAN connector on the system board.



5. Install the cover. See "Replacing the Cover" in "Troubleshooting Your System."



6. Stand the system upright.



7. Install the bezel. See "Installing the Bezel" in "Troubleshooting Your System."



8. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.



Removing the Back System Fan

CAUTION: See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting

against electrostatic discharge.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 86 87

Keine Kommentare

Dell PowerEdge 800 Wartungshandbuch Seite 51