Dell S4810 Spezifikationen PDF herunterladen (Seite 17)

Installing the Software 13

Installing the Software

Navigating CLI Modes

The FTOS prompt changes to indicate the CLI mode. You must move linearly

through the command modes, with the exception of the end command which

takes you directly to EXEC Privilege mode; the exit command moves you up

one command mode level.

Console Access

NOTE: Before starting this procedure, be sure you have a terminal emulation

program already installed on your PC.

The RS-232 console port is labeled on the S4810 chassis. It is in the upper right-

hand side, as you face the I/O side of the chassis.

Step Task

1 Install an RJ-45 copper cable into the console port. Use a rollover cable to

connect the S4810 console port to a terminal server.

2 Connect the other end of the cable to the DTE terminal server.

3 Default terminal settings on the console port are set as follows:

9600 baud rate

No parity

8 data bits

1 stop bit

No flow control

RJ-45

Console Port

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Keine Kommentare

Dell S4810 Spezifikationen Seite 17