Dell M140 Bedienungsanleitung PDF herunterladen (Seite 6)

Back to Contents Page

 BIOS Updates

Dell™XPSM140ServiceManual

Flashing the BIOS

Flashing the BIOS



1. Ensure that the AC adapter is plugged in and that the main battery is properly installed.



2. Turn on the computer.



3. Insert the BIOS update program floppy disk or CD, then reboot the computer.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the flash update is complete, the computer will

automatically reboot.



4. Press <F2> during POST to enter the system setup program.



5. Press <Alt> and <f> to reset the computer defaults.



6. Press <Esc>, select Save changes and reboot, and press <Enter> to save configuration changes.



7. Remove the flash BIOS update program floppy disk or CD from the drive and restart the computer.

Back to Contents Page



NOTICE: Plug the AC adapter into a known-good power source to prevent a loss of power. Failure to do so may cause damage to the computer.

NOTE: If you use a BIOS update program CD to flash the BIOS, set up the computer to boot from a CD before inserting the CD.

NOTICE: Do not interrupt the flash BIOS process once it begins. Interrupting the process may cause damage to the computer.

1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell M140 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks Dell M140