Replacing the Display Assembly
1. Follow the instructions in Preparing to Work Inside the Computer
2. Follow the instructions in Removing the Display Assembly.
3. Align the new display assembly over the screw holes in the base of the computer.
4. Replace the four M2.5 x 5-mm screws (two on each side) to secure the display assembly to the base of the computer.
5. Connect the Mini PCI antenna cable connectors and press the cables into the retaining clips on the base of the computer.
6. Connect the display cable to the system board.
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the hinge cover (see Replacing the Hinge Cover).
Display Bezel
Removing the Display Bezel
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the
back panel) on the computer.
Kommentare zu diesen Handbüchern