Dell Inspiron 630m Bedienungsanleitung PDF herunterladen (Seite 34)

34 Memory Module and Modem

Replacing a Memory Module

CAUTION: Before you perform any of the procedures in this section, follow the safety instructions in the

Product

Information Guide

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically

touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: If you need to install more than one memory module, install a memory module in the memory slot labeled

DIMM A before installing a module in the slot labeled DIMM B. Insert memory modules at a 45-degree angle to

avoid damaging the connector.

NOTE: If a memory module is not installed properly, the computer may not boot. No error message will be

displayed for this type of failure.

Follow the instructions in "Preparing to Work Inside the Computer" on page 7.

Remove the appropriate memory module cover and memory module, if installed (see "Removing a

Memory Module" on page 29).

Install the new memory module:

Align the notch in the memory module edge connector with the tab in the connector slot.

Slide the module firmly into the slot at a 45-degree angle, and then rotate the module down until

it clicks into place. If you do not feel the click, remove the module and reinstall it.

NOTICE: If the memory module cover is difficult to close, remove the memory module and reinstall it. Forcing the

cover to close may damage your computer.

1 memory module

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

Keine Kommentare

Dell Inspiron 630m Bedienungsanleitung Seite 34