Dell Inspiron 4100 Spezifikationen PDF herunterladen (Seite 156)

Removing and Replacing Parts: Dell Inspiron 4100

a. Insert the external microphone and headphone connectors through the

bottom case.

b. Replace the six M2.5 x 5-mm screws, starting on the right side of the

bottom case.

c. Replace the fan guard, inserting the tab into the bottom case, and replace

the three M2.5 x 5-mm screws. Replacing the screw opposite the tab first

makes it easier to insert and replace the other two screws.

4. Replace the modem, the speaker assemblies, and the microprocessor thermal

cooling assembly that you removed from the old system board.

HINT: Be sure to route cables so that they will not be crimped or pinched when

the complete assembly is put back together.

5. Replace the palm rest, the keyboard, the display assembly, and the hard drive.

6. Replace the module bay devices and any PC Cards or plastic blanks in the PC

Card slot.

7. Insert the floppy disk or CD that accompanied the replacement system board

into the appropriate drive, and turn on the computer. Follow the instructions on

the screen.

HINT: After replacing the system board, be sure to enter the computer service

tag sequence into the BIOS of the replacement system board.

Module Latch Assemblies

Removing the Battery and Module Bay Latches

NOTICE: Disconnect the computer and any attached devices from electrical

outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by

touching an unpainted metal surface on the computer.

file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (55 of 58) [2/28/2004 7:04:06 AM]

1 2 ... 151 152 153 154 155 156 157 158 159

Keine Kommentare

Dell Inspiron 4100 Spezifikationen Seite 156