Dell Inspiron 4100 Spezifikationen PDF herunterladen (Seite 114)

Removing and Replacing Parts: Dell Inspiron 4100

3. Replace the M3 x 5-mm screw in the hard drive door.

Adding a Daughter Card Modem

If you ordered the optional modem at the same time that you ordered your computer,

Dell has already installed the modem for you.

1. Make sure that the work surface is flat and clean to prevent scratching the

computer cover.

2. Save and close any open files, exit any open programs, and shut down the

computer.

3. Disconnect the computer from the electrical outlet.

4. Wait 10 to 20 seconds and then disconnect any attached devices.

5. Remove any installed PC Cards, batteries, and devices.

6. To ground yourself, periodically touch an unpainted metal surface on the back of

the computer while you work.

7. Handle components and cards by their edges, and avoid touching pins and

contacts.

8. Turn the computer over, and remove the screws from the modem cover.

9. Place your finger under the cover at the indentation, and lift and slide the cover

open.

10. If a modem is not already installed, go to

step 11. If you are replacing a

modem, remove the existing modem:

a. Remove the screw(s) that secure the modem to the system board, and set

them aside.

b. Pull straight up on the attached pull-tab to lift the modem out of its

connector on the system board, and disconnect the modem cable.

1 pull-tab

file:///F|/Service%20Manuals/Dell/Inspiron/4100/remove.htm (13 of 58) [2/28/2004 7:04:06 AM]

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 158 159

Keine Kommentare

Dell Inspiron 4100 Spezifikationen Seite 114