Dell PowerVault MD3420 Bedienungsanleitung PDF herunterladen (Seite 280)

not work because of hardware errors. In a Forced state, the disk group can be imported, and you can

then identify the hardware errors.

Syntax

set diskGroup [diskGroupName] forcedState

Parameters

Parameter Description

diskGroup

Sequence number of the disk group for which to

set properties. You must put brackets ([ ]) around

the disk group number.

NOTE: You can move the physical disks that comprise a disk group from one storage array to

another storage array. The CLI provides three commands that let you move the physical disks. The

commands are start diskGroup export, start diskGroup import, and set diskGroup

forcedState

. In the Forced state, you can perform an import operation on the disk group.

Set Disk Pool

Description

This command sets the attributes associated with a disk pool based on the specified parameters.

Syntax

set diskPool

(diskPool=[diskPoolName] | diskPools=[diskPoolName1... diskPoolNamen] |

allDiskPools)

[reservePhysicalDiskCount=reservePhysicalDiskCountValue |

warningThreshold=(warningThresholdValue | default) |

criticalThreshold=(criticalThresholdValue | default) |

degradedPriority=(highest|high|medium|low|lowest)

userLabel=

diskPoolName]

Parameters

Parameter Description

diskPools

The list of diskPoolNames identifies multiple

physical disk pool which have their parameters

reset by the command.

allDiskPools

This parameter specifies that all physical disk pools

have their parameters reset by the command.

reservePhysicalDiskCount

This value is specified in terms of the number of

physical disks to reserve in the disk pool for

physical disk failures or physical disk removals.

280

1 2 ... 275 276 277 278 279 280 281 282 283 284 285 ... 404 405

Keine Kommentare

Dell PowerVault MD3420 Bedienungsanleitung Seite 280