Dell PowerVault MD3420 Bedienungsanleitung PDF herunterladen (Seite 172)

100

101

Syntax

create hostPort identifier="wwid"

userLabel="

portLabel"

host="hostName"

interfaceType=SAS

Parameters

Parameter Description

identifier

WWID of the HBA host port. You must put

quotation marks (" ") around the WWID.

userLabel

Name to give the new HBA host port. You must put

quotation marks (" ") around the port label.

host

Name of the host for which you are defining an

HBA host port. You must put quotation marks (" ")

around the host name.

NOTE: An HBA host port is a physical

connection on a host adapter that resides

within a host system. An HBA host port

provides host access to the virtual disks in a

storage array. If the host bus adapter has only

one physical connection (one host port), the

terms host port and host bus adapter are

synonymous.

interfaceType

The identifier for the type of interface for the host

port.

You must enter SAS. If you do not enter SAS, the

command attempts to use an invalid type of

interface. A SAS selection requires an 8-byte

WWID.

NOTE

: You can use any combination of alphanumeric characters, hyphens, and underscores for the

names. Command names can have a maximum of 30 characters. If you exceed the maximum

character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Create iSCSI Initiator

Description

This command creates a new iSCSI initiator object.

Syntax

create iscsiInitiator iscsiName = "iSCSI-ID"

userLabel = "name"

host = "host-name"

[chapSecret = securityKey]

172

1 2 ... 167 168 169 170 171 172 173 174 175 176 177 ... 404 405

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell PowerVault MD3420 Bedienungsanleitung Seite 172

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Dell PowerVault MD3420