Dell PowerEdge 2800 Bedienungsanleitung PDF herunterladen (Seite 8)

1-6 Installing the SCSI Backplane Daughter Card

www.dell.com | support.dell.com

The daughter card fits between the sides of the card guide. To install the daughter card in

the card guide and to connect it to the backplane connector:

Ensure that the retention lever is in the open position.

Hold the daughter card by its edges with the card connector facing the SCSI backplane

and the retention peg facing the retention lever. See Figure 1-2.

Lower the card into the card guide.

Close the retention lever to slide the daughter card into the SCSI backplane connector

and lock the card into place. See Figure 1-2.

Rotate the drive bay retraction bar toward the front of the system. See Figure 1-3.

Figure 1-3. Drive Bay Retraction Bar

Reconnect the control panel cable to its backplane connector. See Figure 1-2.

To use the optional integrated ROMB controller in a split backplane configuration:

Connect channel A on the riser card to SCSIA on the SCSI backplane. This channel

controls the boot drive (drive 0) and drive 1.

Connect SCSI channel B on the riser card to connector SCSIB on the SCSI backplane.

This channel controls drives 2 through 5.

drive bay retraction bar

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

Keine Kommentare

Dell PowerEdge 2800 Bedienungsanleitung Seite 8