Dell POWEREDGE M1000E Bedienungsanleitung PDF herunterladen (Seite 267)

Web Tools Administrator’s Guide 239

53-1001772-01

IPsec over management ports

DRAFT: BROCADE CONFIDENTIAL

• Process indicates a data packet is processed using IPsec encryption, IKE authentication, or

both, using encapsulation security protocol (ESP) processing, or authentication header (AH)

protocol processing.

Use the following procedure to add an IPsec transform policy.

1. Select the Transforms tab.

The Transforms screen displays.

2. Select Add.

The Add Transform dialog box displays.

3. Enter a name in the Transform Name field.

4. Select the IPsec Mode.

The choices are Transpor t or Tunnel.

5. Enter the SA Proposal name.

6. Select the IPsec Protection Type option.

7. Select the IKE Policy Name option.

IKE policies need to be created before adding a transform policy. If there are no names to

select from, you must create an IKE policy.

8. Optional: Enter a local and peer IP address.

9. Click OK.

Adding an IPsec selector

Selectors are used to apply transform policies to an IP flow. Flows are uni-directional. Selectors are

associated with a specific source IP address, a specific peer IP address, and a specific transform.

1. Select the Selectors tab.

The Selectors screen displays.

2. Select Add.

The Add Selector dialog box displays.

3. Enter a name in the Selector Name field.

4. Select the Traffic Flow Direction (in or out).

IPsec policies are unidirectional, and must be applied separately to inbound and outbound

flows.

5. Enter the IP address of the sender in the Source IP Address field.

6. Enter the IP address of the receiver in the Peer IP Address field.

7. En ter th e Transform Name value.

8. The Protocol Name selector allows you to select a specific protocol.

9. Click OK.

1 2 ... 262 263 264 265 266 267 268 269 270 271 272 ... 309 310

Keine Kommentare

Dell POWEREDGE M1000E Bedienungsanleitung Seite 267