Dell DL1000 Betriebsanweisung PDF herunterladen (Seite 81)

5. Expand the recovery point from which you want to restore, then click Rollback.

6. In the Rollback dialog box, under Choose Destination, select Recovery Console Instance.

7. In the Host and Password text boxes, enter the IP address and the authentication password for the

new server to which you want to restore data.

NOTE: The Host and Password values are the credentials you recorded in the previous task.

8. Click Load Volumes to load the target volumes to the new machine.

Mapping Volumes

You can choose to map volumes to the disks on the target server automatically or manually. For

automatic disk alignment, the disk is cleaned and repartitioned and all data is deleted. The alignment is

performed in the order the volumes are listed and the volumes are allocated to the disks appropriately

according to size, and so on. Multiple volumes can use a disk. If you manually map the drives, you cannot

use the same disk twice.

For manual mapping, you must already have the new machine correctly formatted before restoring it.

To map volumes:

1. To automatically map volumes, do the following:

a. On the Disk Mapping page of the Restore Machine Wizard , select the Automatically Map

Volumes tab.

b. In the Disk Mapping area, under Source Volume, verify that the source volume is selected and

that the appropriate volumes are both listed beneath and are selected.

c. If the destination disk that is automatically mapped is the correct target volume, select

Destination Disk.

d. Click Restore, and then proceed to step 3.

2. To manually map volumes, do the following:

a. On the Disk Mapping page of the Restore Machine Wizard, select the Manually Map Volumes

tab.

b. In the Volume Mapping area, under Source Volume, verify that the source volume is selected and

that the appropriate volumes are both listed beneath and are selected.

c. Under Destination, from the drop-down menu, select the appropriate destination that is the

target volume to perform the bare metal restore of the selected recovery point, and then click

Rollback.

3. In the RollbackURC confirmation dialog box, review the mapping of the source of the recovery point

and the destination volume for the rollback. To perform the rollback, click Restore.

CAUTION: If you select Begin Rollback, all existing partitions and data on the target drive will

be permanently removed, and replaced with the contents of the selected recovery point,

including the operating system and all data.

Viewing The Recovery Progress

To view the recovery progress:

1. After you initiate the rollback process, the Active Task dialog box displays, showing that the rollback

action initiated.

NOTE: This appearance of the Active Task dialog box does not indicate successful completion

of the task.

2. Optionally, to monitor the rollback task progression, from the Active Task dialog box, click Open

Monitor Window. You can view the status of the recovery as well as the start and end times from the

Monitor Open Task window.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 101 102

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell DL1000 Betriebsanweisung Seite 81

Kommentare zu diesen Handbüchern