Dell DL1000 Betriebsanweisung PDF herunterladen (Seite 80)

To load a boot CD:

1. Navigate to the new server, load the boot CD, and then start the machine.

2. Specify to Boot from CD-ROM, which loads the following:

• Windows 7 PE

• AppAssure 5 Agent software

The AppAssure Universal Recovery Console starts and displays the IP address and authentication

password for the machine.

3. Record the IP address displayed in the Network Adapters Settings pane and the authentication

password displayed in the Authentication pane. You will use this information later during the data

recovery process to log back on to the console.

4. If you want to change the IP address, select it and click Change.

NOTE: If you specified an IP address in Create Boot CD dialog box, the Universal Recovery

Console uses it and displays it in the Network Adapter settings screen.

Injecting Drivers To Your Target Server

If you are restoring to dissimilar hardware, you must inject storage controller, RAID, AHCI, chipset and

other drivers if they are not already on the boot CD. These drivers make it possible for the operating

system to operate all devices on your target server successfully.

If you are unsure which drivers your target server requires, click the System Info tab in the Universal

Recovery Console. This tab shows all system hardware and device types for the target server to which

you want to restore.

NOTE: Keep in mind that your target server automatically contains Windows 7 PE 32-bit drivers.

To inject drivers to your target server:

1. Download the drivers from the manufacturer’s website for the server and unpack them.

2. Compress the folder that contains the drivers by using a file compressing utility (for example, Win

Zip) and copy it to the target server.

3. In the Universal Recovery Console, click Driver Injection.

4. To locate the compressed driver file, navigate through the filing system and select the file.

5. If you clicked Driver Injection in step 3, click Add Driver. If you clicked Load driver in step 3, click

Open.

The selected drivers are injected and will be loaded to the operating system after you reboot the

target server.

Launching A Restore From The AppAssure Core

To launch a restore from the AppAssure Core:

1. If the NICs on any system being restored are teamed (bonded), remove all but one of the network

cables.

NOTE: AppAssure Restore does not recognize teamed NICs. The process is not able to resolve

which NIC to use if presented with more than one active connection.

2. Navigate back to the Core server and open the Core Console.

3. On the Machines tab, select the machine from which you want to restore data.

4. Click the Actions menu for the machine, click Recovery Points to view a list of all recovery points for

that machine.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 101 102

Keine Kommentare

Dell DL1000 Betriebsanweisung Seite 80