Dell Networking S6000 Betriebsanweisung PDF herunterladen (Seite 82)

The total amount of space allowed is 16 FP Blocks. System flow requires three

blocks and these blocks cannot be reallocated. The ipv4acl profile range is from

1 to 4.

When configuring space for IPv6 ACLs, the total number of Blocks must equal 13.

Ranges for the CAM profiles are from 1 to 10, except for the ipv6acl profile which

is from 0 to 10. The

ipv6acl allocation must be a factor of 2 (2, 4, 6, 8, 10).

If you enabled BMP, to perform a reload on the chassis to upgrade any

configuration changes that have changed the NVRAM content, use the reload

conditional nvram-cfg-change

command.

clear line

Reset a terminal line.

S6000

Syntax

clear line {line-number | aux 0 | console 0 | vty number}

Parameters

line-number Enter a number for one of the 12 terminal lines on the

system. The range is from 0 to 11.

aux 0 Enter the keywords aux 0 to reset the auxiliary port.

console 0 Enter the keywords console 0 to reset the console port.

vty number Enter the keyword vty then a number to clear a terminal

line. The range is from 0 to 9.

Command

Modes

EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 8.1.1.0 Introduced on the E-Series ExaScale.

Version 7.6.1.0 Introduced on the S-Series.

Control and Monitoring

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 150 151

Keine Kommentare

Dell Networking S6000 Betriebsanweisung Seite 82