Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Bedienungsanleitung PDF herunterladen (Seite 18)

Configuring Boot From SAN Using iSCSI-Based Dell Storage Arrays

8. Press <ESC> once to return to the Main Menu; then select 1st Target Parameters and press

<Enter>.

9. Under 1st Target Parameters, enter the following information:

Connect: This option should be enabled.

IP Address: This parameter should be set to the iSCSI target IP address. For an

EqualLogic-based target, this IP address will be the Group IP address. For an

MD3000i-based target, this IP address will be one of the IP addresses assigned

to the ports on the preferred path RAID controller module.

TCP Port: Default is 3260. This value can be changed to match specific target

information.

Boot LUN: Default is 0. This value usually will not need to be changed.

iSCSI Name: Manually entered IQN name of the iSCSI target.

CHAP ID: (optional)

CHAP Secret: (optional)

Page 16

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 36 37

Keine Kommentare

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Bedienungsanleitung Seite 18