Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Bedienungsanleitung PDF herunterladen (Seite 17)

Configuring Boot From SAN Using iSCSI-Based Dell Storage Arrays

7. Under Initiator Parameters, enter the following information:

IP Address: <host IP Address>

Subnet Mask: <host netmask>

Default Gateway: Not required, if the iSCSI initiator (this host) and the iSCSI target reside on the

same subnet

Primary DNS: Usually not required

Secondary DNS: Usually not required

iSCSI Name: The server will auto-generate an IQN name for this host. If the target is set to

control access based on an IQN name, then this name must be changed to

match the IQN configured on the target (see “Configuring the Dell EqualLogic

Storage System” on page 6 or ”Configuring the PowerVault MD3000i Storage

Array” on page 7).

CHAP ID: (optional)

CHAP Secret: (optional)

Page 15

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 36 37

Keine Kommentare

Dell Microsoft Windows Unified Data Storage Server 2003 (PowerVault NX 1950) Bedienungsanleitung Seite 17